Caitlin Brumby

Get 2pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 Description: Support Arduino UNO and Arduino Mega2560 and other development board DIP, Without any wiring, all open source, Arduino libraries offer The backlight always on, can not control the backlight, backlight is connect to 3.3V DC: 5V More information: >>>> Click here <<<< Note: The control and driving circuit of TFT modules is low voltage and  FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:　 1. Using soldering iron or  power FRIDA tools must be well grounded and operation, make them without leakage; 2. Do not use hand to touch the leads, circuit boards and metal boxes; 3. Do not use a vacuu

Get 5pcs Wemos® SHT30 Shield V2.0.0 SHT30 I2C Digital Temperature And Humidity Sensor Module For D1 Mini Features: I2C Interface Two user selectable addresses Typical accuracy ±3%RH and ±0.3°C Separable design Φ2mm mounting holes   Package included:   5 x SHT30 Shield 10 x Pin 5pcs Wemos® SHT30 Shield V2.0.0 SHT30 I2C Digital Temperature And Humidity Sensor Module For D1 Mini See detail

Get 3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 Description: Support Arduino UNO and Arduino Mega2560 and other development board DIP, Without any wiring, all open source, Arduino libraries offer The backlight always on, can not control the backlight, backlight is connect to 3.3V DC: 5V More information: >>>> Click here <<<< Note: The control and driving circuit of TFT modules is low voltage and  FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:　 1. Using soldering iron or  power FRIDA tools must be well grounded and operation, make them without leakage; 2. Do not use hand to touch the leads, circuit boards and metal boxes; 3. Do not use a vacuu

Get 3pcs Geekcreit® 7Pin 0.96 Inch OLED Display 12864 SSD1306 SPI IIC Serial LCD Screen Module For Arduino Feature:   Control chip: SSD1306 Display area: 21.744 x 10864mm Physical size: 27.3 x 27.8mm Interface type: Default 4-wire SPI Switchable rear resistor to use 3-wire SPI, IIC interfaces Number of pins: 7 Display color: yellow blue Working temperature: -40~70°C Net weight: 5g   Interface definition:   1> GND (Power ground) 2> VCC (Power + 3.3-5V) 3> D0 (SPI clock line for SPI interface and IIC clock line for IIC interface) 4> D1 (SPI data line for SPI interface and IIC data line for IIC interface) 5> RES (OLED reset, OLED needs to be reset once after power-on) 6> DC (SPI data/command selection pin, used to set IIC address when IIC interface) 7> CS (OLED SPI chip select, active low, if you do not want to use must be grounded)   Package includes:   3 x 0.96 Inch OLED Display Module Wiring method: Wiring 1: MCU har