433MHz/315MHz Wireless Remote Control Switch 220V 2CH Code 1527 Transmitter Remote Control RF Relay Receiver For Light Switch
Specifications Of The Transmitter:
Model Number: KT05-4
Operating Frequency: 433MHz/315MHz
Power by 3V Coin Cell Button Battery (Battery included )
Material: PVC
Button: 2 Buttons
Size: 59mm x 28mm x 8mm
Operating Voltage: 3V
Operating Current: 12mA
Transmitting Power: 10mw
Modulation Mode: ASK (AM)
Encoding Type: Learning
Transfers Distance: 20-50 m
Specifications Of The Receiver:
Model Number: KR2202-4
Product Type: Dual Channel Remote Control Switch
Encoding Type: Intelligent Learning Code
RF Working Mode: Superheterodyne Reception
Modulation Mode: ASK
Working Mode: Momentary, Toggle and Latching Mode.
RF Frequency: 433MHz/315MHz
Input Voltage: AC 85V~250V
Standby Current:<8.5mA
Receiving Sensitivity: >97dbm
Remote Control Range: >50m (Free Space)
Wired Connection Way: Fixed Wiring Pillar
Output Terminal: NO, COM, NC
On-off Output (Wire Port): NO(Normal Open), COM(Commonality End), NC(Normally Closed End).
Color: Green (PCB Board), White (Outside Shell)
Circuit Board Size: 7.3 * 5.2 * 2.5cm
Operation Introduction:
About Working Mode:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Clearing the Code:
Press the Learning Button on the receivers for 8 times, the codes will be cleaned.
After cleaning the code, all the remote control cannot work anymore.
Learning the Code: (Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off, it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, it means learning successfully.
Learning the Code: (Toggle)
Press the learning key on the receiver twice, it comes into toggle setting mode.
Wait for a moment, the LED will be off, it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, it means learning successfully.
Learning the Code: ( Latching)
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver triple time, it comes into latching mode.
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.
A = ON, B = OFF.
Package Includes:
1 x KR2202-4 2CH Receiver Module ( include Shell )
5 xKT05-4 EV1527 Learning Code Remote Control (Include Battery)
433MHz/315MHz Wireless Remote Control Switch 220V 2CH Code 1527 Transmitter Remote Control RF Relay Receiver For Light Switch See detail
